| IfIndex |
| The WLAN radio index. |
| Address |
| MAC Address of the Assigned STA. Length: 6 to 6 |
| VSSIndex |
| The ifindex of the associated Service Set. |
| State |
| description not available Enumerations: - none (1)
- associating (2)
- associated (3)
- authenticate (4)
- authenticated (5)
- delete (8)
|
| Security |
| The Security Option of the Station. Enumerations: - none (1)
- wep40 (2)
- wep104 (3)
- wpa-psk (4)
- wpa (5)
- wpa2 (6)
|
| Node |
| description not available Enumerations: - unknown (1)
- access-point (2)
- client (3)
|
| MSDUTx |
| This attribute counts the total number of packets transmitted to this station. |
| MSDURx |
| This attribute counts the total number of packets received from this station. |
| BytesTx |
| This attribute counts the total number of octets transmitted to this station. |
| BytesRx |
| This attribute counts the total number of octets received from this station. |
| Rate |
| This attribute reflects the data rate of the latest packet received from this station, in 500 kbps units. Range: 0 to 600 |
| Signal |
| This attribute shows the received signal strength in dBm. Range: -110 to 0 |
| Noise |
| This attribute shows the measured noise level in dBm, or 0 if no connection can be established. Range: -110 to 0 |
| ConnectTime |
| This attribute records the system uptime at the moment the client successfully finished association. |
| TimeoutTStamp |
| Internal time stamp of the most recent STA timeout poll. |
| TimeoutCount |
| Internal counter for number of polls sent to the STA without reply. |
| RxFrames54 |
| This attribute shows the number of data frames that were received at 54 Mbps. |
| RxFrames48 |
| This attribute shows the number of data frames that were received at 48 Mbps. |
| RxFrames36 |
| This attribute shows the number of data frames that were received at 36 Mbps. |
| RxFrames24 |
| This attribute shows the number of data frames that were received at 24 Mbps. |
| RxFrames18 |
| This attribute shows the number of data frames that were received at 18 Mbps. |
| RxFrames12 |
| This attribute shows the number of data frames that were received at 12 Mbps. |
| RxFrames11 |
| This attribute shows the number of data frames that were received at 11 Mbps. |
| RxFrames9 |
| This attribute shows the number of data frames that were received at 9 Mbps. |
| RxFrames6 |
| This attribute shows the number of data frames that were received at 6 Mbps. |
| RxFrames5 |
| This attribute shows the number of data frames that were received at 5.5 Mbps. |
| RxFrames2 |
| This attribute shows the number of data frames that were received at 2 Mbps. |
| RxFrames1 |
| This attribute shows the number of data frames that were received at 1 Mbps. |
| TxFrames54 |
| This attribute shows the number of data frames that were transmitted at 54 Mbps. |
| TxFrames48 |
| This attribute shows the number of data frames that were transmitted at 48 Mbps. |
| TxFrames36 |
| This attribute shows the number of data frames that were transmitted at 36 Mbps. |
| TxFrames24 |
| This attribute shows the number of data frames that were transmitted at 24 Mbps. |
| TxFrames18 |
| This attribute shows the number of data frames that were transmitted at 18 Mbps. |
| TxFrames12 |
| This attribute shows the number of data frames that were transmitted at 12 Mbps. |
| TxFrames11 |
| This attribute shows the number of data frames that were transmitted at 11 Mbps. |
| TxFrames9 |
| This attribute shows the number of data frames that were transmitted at 9 Mbps. |
| TxFrames6 |
| This attribute shows the number of data frames that were transmitted at 6 Mbps. |
| TxFrames5 |
| This attribute shows the number of data frames that were transmitted at 5.5 Mbps. |
| TxFrames2 |
| This attribute shows the number of data frames that were transmitted at 2 Mbps. |
| TxFrames1 |
| This attribute shows the number of data frames that were transmitted at 1 Mbps. |
| IpAddress |
| This attribute shows the IP address of the client. It is only available if any IP frames have been received from the client. |
| RSSI1 |
| This attribute shows the received signal strength at the first receiver in dBm. The value 0 indicates no connection. Range: -110 to 0 |
| RSSI2 |
| This attribute shows the received signal strength at the second receiver in dBm. The value 0 indicates no connection or no second receiver present. Range: -110 to 0 |
| RSSI3 |
| This attribute shows the received signal strength at the third receiver in dBm. The value 0 indicates no connection or no third receiver present. Range: -110 to 0 |
| RxAirtime |
| Accumulated estimated time in microseconds for all unidirectional frames received from this station. |
| TxAirtime |
| Accumulated estimated time in microseconds for all unidirectional frames transmitted to this station. |
| Capabilities |
| This field contains supported capabilities of a station. uapsd-vo := AC_VO U-APSD Flag enabled uapsd-vi := AC_VI U-APSD Flag enabled uapsd-bk := AC_BK U-APSD Flag enabled uapsd-be := AC_BE U-APSD Flag enabled Enumerations: - uapsd-vo (0)
- uapsd-vi (1)
- uapsd-bk (2)
- uapsd-be (3)
|
| LastSeen |
| Timestamp of the last received frame by this Station Range: 0 to -1 |
| RxDiscards |
| Count of discarded bytes due to bandwidth limitation. see wlanVSSStationRxShaping |
| TxDiscards |
| Count of discarded bytes due to bandwidth limitation. see wlanVSSStationTxShaping |
| TxRate |
| This attribute reflects the data rate of the latest packet transmitted to this station, in 500 kbps units. |