| IfIndex |
| System generated unique WLAN bridge link index. |
| Address |
| Address where the WBL slave is associated with. Or on WBL master it is the MAC-Address of the connected WBL slave. |
| State |
| Show the current state of the WBL endpoint. |
| Signal |
| Received signal strength of latest received data frame. |
| Noise |
| This attribute shows the measured noise level in dBm, or 0 if no connection can be established. |
| ConnectTime |
| This attribute records the time at the moment the WBL endpoint successfully connect. |
| LastSeen |
| Timestamp of the last received frame by this WBL endpoint. |
| TxBytes |
| Total number of transmitted bytes. |
| RxBytes |
| Total number of received bytes. |
| TxRate |
| This attribute returns the data rate of the last successful transmitted packet in 500 Kbps units. |
| RxRate |
| This attribute returns the data rate of the last successful received packet in 500 Kbps units. |
| RxFrames54 |
| This attribute shows the number of data frames that were received at 54 Mbps. |
| RxFrames48 |
| This attribute shows the number of data frames that were received at 48 Mbps. |
| RxFrames36 |
| This attribute shows the number of data frames that were received at 36 Mbps. |
| RxFrames24 |
| This attribute shows the number of data frames that were received at 24 Mbps. |
| RxFrames18 |
| This attribute shows the number of data frames that were received at 18 Mbps. |
| RxFrames12 |
| This attribute shows the number of data frames that were received at 12 Mbps. |
| RxFrames11 |
| This attribute shows the number of data frames that were received at 11 Mbps. |
| RxFrames9 |
| This attribute shows the number of data frames that were received at 9 Mbps. |
| RxFrames6 |
| This attribute shows the number of data frames that were received at 6 Mbps. |
| RxFrames5 |
| This attribute shows the number of data frames that were received at 5.5 Mbps. |
| RxFrames2 |
| This attribute shows the number of data frames that were received at 2 Mbps. |
| RxFrames1 |
| This attribute shows the number of data frames that were received at 1 Mbps. |
| TxFrames54 |
| This attribute shows the number of data frames that were transmitted at 54 Mbps. |
| TxFrames48 |
| This attribute shows the number of data frames that were transmitted at 48 Mbps. |
| TxFrames36 |
| This attribute shows the number of data frames that were transmitted at 36 Mbps. |
| TxFrames24 |
| This attribute shows the number of data frames that were transmitted at 24 Mbps. |
| TxFrames18 |
| This attribute shows the number of data frames that were transmitted at 18 Mbps. |
| TxFrames12 |
| This attribute shows the number of data frames that were transmitted at 12 Mbps. |
| TxFrames11 |
| This attribute shows the number of data frames that were transmitted at 11 Mbps. |
| TxFrames9 |
| This attribute shows the number of data frames that were transmitted at 9 Mbps. |
| TxFrames6 |
| This attribute shows the number of data frames that were transmitted at 6 Mbps. |
| TxFrames5 |
| This attribute shows the number of data frames that were transmitted at 5.5 Mbps. |
| TxFrames2 |
| This attribute shows the number of data frames that were transmitted at 2 Mbps. |
| TxFrames1 |
| This attribute shows the number of data frames that were transmitted at 1 Mbps. |
| RSSI1 |
| This attribute shows the received signal strength at the first receiver in dBm. |
| RSSI2 |
| This attribute shows the received signal strength at the second receiver in dBm. |
| RSSI3 |
| This attribute shows the received signal strength at the third receiver in dBm. |