| Number |
| The PLCI (physical link connection identifier) of the application. Range: 0 to -1 |
| Application |
| The application-number (capiApplNumber). |
| Controller |
| The ISDN controller number. This value refers to the isdnStkNumber. Range: 0 to -1 |
| State |
| The current link state as described in the CAPI state diagram. Enumerations: - p-0 (1)
- p-1 (2)
- p-2 (3)
- p-3 (4)
- p-4 (5)
- p-5 (6)
- p-6 (7)
- p-7 (8)
- p-act (9)
|
| SelectB2Proto |
| The current B2 protocol setting (CAPI 1.1 applications only). Enumerations: - undef (1)
- x75 (2)
- hdlccrc (3)
- trans (4)
- sdlc (5)
- x75btx (6)
- fax (7)
- lapd (8)
- v110trans (9)
- v110sdlc (10)
- v110x75 (11)
- txonly (12)
- modem (241)
- v110sync (242)
|
| SelectB2Dlpd |
| Current B2 protocol descriptor. DLPD = data link protocol descriptor (CAPI 1.1 applications only). |
| SelectB3Proto |
| Current B3 protocol setting (CAPI 1.1 applications only). Enumerations: - undef (1)
- t70nl (2)
- iso8208 (3)
- t90 (4)
- trans (5)
- t30 (6)
|
| SelectB3Ncpd |
| The current B3 Ncpd setting. NCPD = network control protocol descriptor (CAPI 1.1 applications only). |
| B1Proto |
| Current CAPI 2.0 B1 protocol setting. Enumerations: - undef (1)
- hdlc (2)
- trans (3)
- v110trans (4)
- v110hdlc (5)
- faxg3 (6)
- hdlcinv (7)
- hdlc56 (8)
- modemneg (9)
- modemasync (10)
- modemsync (11)
|
| B1Config |
| Current CAPI 2.0 B1 protocol configuration setting. |
| B2Proto |
| Current CAPI 2.0 B2 protocol setting. Enumerations: - undef (1)
- x75 (2)
- trans (3)
- sdlc (4)
- lapd (5)
- t30 (6)
- ppp (7)
- transerr (8)
- modem (9)
|
| B2Config |
| Current CAPI 2.0 B2 protocol configuration setting. |
| B3Proto |
| Current CAPI 2.0 B3 protocol setting. Enumerations: - undef (1)
- trans (2)
- t90 (3)
- iso8208 (4)
- x25dce (5)
- t30 (6)
- t30ext (7)
- modem (9)
|
| B3Config |
| Current CAPI 2.0 B3 protocol configuration setting. |
| CipValue |
| The current CIPValue setting. |
| InfoMask |
| The current InfoMask setting. Range: 0 to -1 |