>> Table: wlanIfFeatureTable - (.1.3.6.1.4.1.272.4.46.23.1)

wlanIfFeatureTable
OID	Name	Type	Access
.1	WlanIf	INTEGER	R
.2	OperatingBands	BITS	R
.3	AntennaDiversity	ENUM	R
.4	TxPowerMin	INTEGER	R
.5	TxPowerMax	INTEGER	R
.6	TxPowerFixedStepsList	DisplayString	R
.7	FrameCompression	ENUM	R
.8	FrameConcatenation	ENUM	R
.9	PiggybackAck	ENUM	R
.10	DirectLink	ENUM	R
.11	LinkDistance	ENUM	R
.12	ShortRetries	ENUM	R
.13	LongRetries	ENUM	R
.14	FragThreshold	ENUM	R
.15	CCAMode	ENUM	R
.16	EdThreshold	ENUM	R
.17	CWMin	ENUM	R
.18	CWMax	ENUM	R
.19	RxLifetime	ENUM	R
.20	TxLifetime	ENUM	R
.21	SkipModes	BITS	R
.22	SupportedModes	BITS	R
.23	SpatialStreams	INTEGER	R

WlanIf

Wireless card interface index the table belongs.

OperatingBands

This variable says which bands the wireless card supports. Default is 2.4 and 5 GHZ. Enumerations: band24 (0) band5 (1) band58 (2)

AntennaDiversity

This variable says which kind of antenna diversity the wireless card supports. Default is none. Enumerations: none (0) rx (1) tx (2) rx-tx (3)

TxPowerMin

The minimal value of the TX power the wireless card supports. Range: 0 to 30

TxPowerMax

The maximal value of the TX power the wireless card supports. Range: 0 to 30

TxPowerFixedStepsList

This variable shows the available TX Power values in dBm seperated by commas. Length: 0 to 255

FrameCompression

This variable says if the wireless card supports frame compression or not. Default is false. Enumerations: true (1) false (2)

FrameConcatenation

This variable says if the wireless card supports frame concatination or not. Default is false. Enumerations: true (1) false (2)

PiggybackAck

This variable says if the wireless card supports piggyback ACKs or not. Default is false. Enumerations: true (1) false (2)

DirectLink

This variable says if the wireless card supports direct links or not. Default is false. Enumerations: true (1) false (2)

LinkDistance

This variable says if the wireless card supports a configurable link distance or not. Default is false. Enumerations: true (1) false (2)

ShortRetries

This variable says if the wireless card supports the configuration of the short retry value or not. Default is false. Enumerations: true (1) false (2)

LongRetries

This variable says if the wireless card supports the configuration of the long retry value or not. Default is false. Enumerations: true (1) false (2)

FragThreshold

This variable says if the wireless card supports the configuration of the fragmentation threshold value or not. Default is false. Enumerations: true (1) false (2)

CCAMode

This variable says if the wireless card supports the configuration of the CCA mode or not. Default is false. Enumerations: true (1) false (2)

EdThreshold

This variable says if the wireless card supports the configuration of the energy detection threshold value or not. Default is false. Enumerations: true (1) false (2)

CWMin

This variable says if the wireless card supports the configuration of the minimal contention window or not. Default is false. Enumerations: true (1) false (2)

CWMax

This variable says if the wireless card supports the configuration of the maximal contention window or not. Default is false. Enumerations: true (1) false (2)

RxLifetime

This variable says if the wireless card supports the configuration of the receive packet lifetime or not. Default is false. Enumerations: true (1) false (2)

TxLifetime

This variable says if the wireless card supports the configuration of the transmit packet lifetime or not. Default is false. Enumerations: true (1) false (2)

SkipModes

This variable says which modes of the WlanIfSkipChannels the wireless card supports. Default is client24ghz. Enumerations: ap24ghz (0) ap5ghz (1) client24ghz (2) client5ghz (3)

SupportedModes

This variable shows the supported 802.11 modes Enumerations: dot11a (0) dot11b (1) dot11g (2) dot11n (3)

SpatialStreams

This variable shows the maximum number of supported spatial streams Range: 1 to 4