>> Table: wlanLinkTestTable - (.1.3.6.1.4.1.272.4.46.11.1)

wlanLinkTestTable
OID	Name	Type	Access
.1	SignalLocal	WlanRSSI	R
.2	SignalRemote	WlanRSSI	R
.3	NoiseLocal	WlanRSSI	R
.4	NoiseRemote	WlanRSSI	R
.5	SNRLocal	INTEGER	R
.6	SNRRemote	INTEGER	R
.7	FramesTransmitted	Counter32	R
.8	FramesReceived	Counter32	R
.9	FramesLost	Counter32	R
.10	RateLocal	WlanRate	R
.11	RateRemote	WlanRate	R
.33	RxFrames48	Counter32	R
.32	RxFrames54	Counter32	R
.34	RxFrames36	Counter32	R
.37	RxFrames12	Counter32	R
.36	RxFrames18	Counter32	R
.35	RxFrames24	Counter32	R
.38	RxFrames11	Counter32	R
.39	RxFrames9	Counter32	R
.41	RxFrames5	Counter32	R
.40	RxFrames6	Counter32	R
.42	RxFrames2	Counter32	R
.43	RxFrames1	Counter32	R
.50	Update	INTEGER	RW
.99	IfIndex	INTEGER	R

SignalLocal

This attribute shows the received signal strength in dBm.

SignalRemote

This attribute shows the received signal in dBm, as measured by remote bridge link partner. Reading this attribute triggers transmission of a new link request frame.

NoiseLocal

This attribute shows the measured noise level in dBm.

NoiseRemote

This attribute shows the noise level in dBm, as measured by remote bridge link partner.

SNRLocal

This attribute shows the calculated Signal to Noise ratio in dB.

SNRRemote

This attribute shows the calculated Signal to Noise ratio in dB, as measured by remote bridge link partner.

FramesTransmitted

This attribute shows the number of link test frames transmitted.

FramesReceived

This attribute shows the number of link test frames successfully received.

FramesLost

This attribute shows the number of link test frames for which no reply has been received and therefore are considered lost.

RateLocal

This attribute shows the data rate of the most recent received link test frame, in 500 Kbps units.

RateRemote

This attribute shows the data rate of the most recent link test frame received by the link partner, in 500 Kbps units.

RxFrames48

This attribute shows the number of link test frames that were received at 48 Mbps.

RxFrames54

This attribute shows the number of link test frames that were received at 54 Mbps.

RxFrames36

This attribute shows the number of link test frames that were received at 36 Mbps.

RxFrames12

This attribute shows the number of link test frames that were received at 12 Mbps.

RxFrames18

This attribute shows the number of link test frames that were received at 18 Mbps.

RxFrames24

This attribute shows the number of link test frames that were received at 24 Mbps.

RxFrames11

This attribute shows the number of link test frames that were received at 11 Mbps.

RxFrames9

This attribute shows the number of link test frames that were received at 9 Mbps.

RxFrames5

This attribute shows the number of link test frames that were received at 5.5 Mbps.

RxFrames6

This attribute shows the number of link test frames that were received at 6 Mbps.

RxFrames2

This attribute shows the number of link test frames that were received at 2 Mbps.

RxFrames1

This attribute shows the number of link test frames that were received at 1 Mbps.

Update

Writing any non-zero value to this attribute triggers transmission of a new link request frame. Reading this attribute always returns 0.

IfIndex

Auxiliary index in wlanLinkTestTable.